dir-825 reset
dir-825 reset

進入DIR-825設定畫面(http://192.168.0.1)之後，請選擇”工具->系統”。2.按下”.”按鈕即可回復出廠預設值。*您亦可在電源接通的狀況下，按.下DIR-825背面的Reset鍵 ...,Clickthebuttontorestorethefactorydefaultsettings.Alsoyoucanrestorethefactorydefaultsviatheh...

How to reset a D-Link DIR

2020年2月4日—Powerontherouter.Waitfor5minutesorsountiltheroutersettlesdown.Presstheresetbuttonforabout15secondsorso,untilthelights ...

** 本站引用參考文章部分資訊，基於少量部分引用原則，為了避免造成過多外部連結，保留參考來源資訊而不直接連結，也請見諒 **

D-Link DIR

進入DIR-825 設定畫面(http://192.168.0.1)之後，請選擇”工具-> 系統”。 2. 按下”. ”按鈕即可回復出廠預設值。 *您亦可在電源接通的狀況下，按. 下DIR-825 背面的Reset 鍵 ...

DIR-825AC - D

Click the button to restore the factory default settings. Also you can restore the factory defaults via the hardware RESET button (see the. Back Panel ...

How do I reset my router to factory default settings?

Step 1: With the unit on, use the end of a paperclip to press the reset button, which is located inside a small hole on the base of the unit.

How to hard reset my router to default settings?

To perform a factory reset, please follow the steps below. Step 1: With the unit on, place a paper clip into the hole on the back of the unit labeled Reset.

How to reset a D-Link DIR

2020年2月4日 — Power on the router. Wait for 5 minutes or so until the router settles down. Press the reset button for about 15 seconds or so, until the lights ...

How to reset D-Link DIR

2020年11月12日 — This simple steps but very effective on how to reset your D-Link DIR-825 Router. Please watch my next video on how to configure D-Link ...

Reset孔

在通電的情況下，拿一支迴紋針按下設備上的Reset孔持續約10秒鐘後放掉。 ... 1. 請勿持續按Reset 孔時間過久。 2. 回復原廠預設值動作並不會將韌體回復至出廠 ...

dir-825reset

進入DIR-825設定畫面(http://192.168.0.1)之後，請選擇”工具->系統”。2.按下”.”按鈕即可回復出廠預設值。*您亦可在電源接通的狀況下，按.下DIR-825背面的Reset鍵 ...,Clickthebuttontorestorethefactorydefaultsettings.AlsoyoucanrestorethefactorydefaultsviathehardwareRESETbutton(seethe.BackPanel ...,Step1:Withtheuniton,usetheendofapapercliptopresstheresetbutton,whichislocatedinsideasmallholeonthebaseofthe...

參考資訊如下