channel-group mode active
2023年12月8日—最後啟用port-channel1指令:(config-if-range)#channel-group1modeactive.統整:要在2960上做LACP至少需要上面六個步驟,統一將指令用法歸納 ...,2012年2月13日—Active:會進入主動協商狀態,端口會通過發送LCAP...CS1(config-if-range)#channel-group...
然後,两边都用channel-group1modeon把Port放进同一个Group中,1这个数字叫做ChannelGroupNumber,可设定1-256,两只Switch的ChannelGroupNumber不用相同, ...
** 本站引用參考文章部分資訊,基於少量部分引用原則,為了避免造成過多外部連結,保留參考來源資訊而不直接連結,也請見諒 **
此文章參考的來源相關文章推薦
Cisco 2960鏈路聚合(LACP)
2023年12月8日 — 最後啟用port-channel 1 指令: (config-if-range)# channel-group 1 mode active. 統整: 要在2960上做LACP至少需要上面六個步驟,統一將指令用法歸納 ...
CISCO Port
2012年2月13日 — Active:會進入主動協商狀態,端口會通過發送LCAP ... CS1(config-if-range)#channel-group 1 mode ? ... Port-channel = Po1 GC = - Pseudo port-channel = Po1
Cisco Switch 問題
channel-group 1 mode active. 1.建立etherchannel虛擬介面 2.指派實體介面加入該etherchannel 3. mode 後方如為active 則為支援LACP, ...
Configuring Port Channels
[mode on | active | passive}] force—Specifies that the LAN port be forcefully added to the channel group. mode—Specifies the port channel mode of the interface ...
EtherChannel PAgP LACP 以太通道
然後,兩邊都用channel-group 1 mode on 把Port 放進同一個Group 中,1 這個數字叫做Channel Group Number,可設定1-256,兩隻Switch 的Channel Group Number 不用相同, ...
EtherChannel PAgP LACP 以太通道
然後,两边都用channel-group 1 mode on 把Port 放进同一个Group 中,1 这个数字叫做Channel Group Number,可设定1-256,两只Switch 的Channel Group Number 不用相同, ...
EtherChannel 設定
2021年3月14日 — LACP active: initiates negotiations; LACP ... SW1(config-if)#switchport mode trunk. SW1 ... SW2(config-if-range)#channel-group 1 mode desirable
LACP or not? channel
LACP is usually used where you need to channel the equipment of multiple vendors together. We for example use it to create a 4 Gig channel between a Nortel 8610 ...
Vlan溝通的三種模式 - Coolking's CCNP 筆記
2010年12月24日 — ... channel-group 2 mode active. switchport mode access ! interface FastEthernet0/24. channel-group 2 mode active. switchport mode access !