How can I troubleshoot iSCSI connection issues? (DSM 7.0)

In order to configure iSCSI connections, all iSCSI initiators must discover and log on to target storage devices. This topic provides information for ...

2021年1月17日 — Make sure that Enable CHAP log on is not checked. If the iSCSI Initiator finds an iSCSI target but fails to connect to it: In Windows iSCSI ...

2021年1月20日 — Make sure that Enable CHAP log on is not checked. If the iSCSI Initiator finds an iSCSI target but fails to connect to it: In Windows iSCSI ...

2024年3月11日 — There is a Windows Server with iSCSI target configured, and the event log keeps filling with the message like this: iSCSI initiator iqn.1994-05.

2014年4月17日 — Otherwise, I did not do much else differently. There is some suspicion from Drobo that some background sync operations may have been interfering ...

2024年3月20日 — 本文提供Microsoft iSCSI 啟動器在啟動器名稱變更後無法登入我的最愛目標的問題解決方案。 原始KB 編號： 2500271. 徵狀. 請考慮下列情節： 在執行Windows ...

Login problems occur when you use iSNS for target discovery. When you configure the initiator with iSNS target discovery, it can intermittently fail to log in ...

2021年9月27日 — See the snippet from Configuring the switches - iSCSI, Windows below: Port channels/LACP is not supported on the controller's switch ports ...

2020年12月4日 — The server was still configured to use a CHAP login, just as it always had been. Not really knowing what else to try, I began experimenting ...

You cannot log off the session for an iSCSI disk or take a disk offline from the Cluster Shared Volumes list in Windows Server 2008 R2 if the disk is an ...